NHN® PDC100 Series
Patch Fitting Pivot Door Closers for Glass Doors
Smart door closing application suitable for glass doors. Double acting, narrow style and easy installation.
Suitable for the doors up to 100kgs (220lbs) weight.
Catalog – Pivot Door Closer, PDC100 (glass doors)
The NHN PDC100 patch fitting pivot door closer is the first in the Flagship Range from NHN’s next generation of hidden door closers.
Incorporating the latest cam type technology, the NHN PDC100 patch fitting pivot door closer offers easy opening with increased efficiency on the closing torque.
- The closing speed is easily adjusted via two independent adjustment valves.
- Available with or without hold open at 90°.
- Narrow style with high performance.
- Easy installation; cost and time saving as no preparation on the floor needed.
- 5 year Guarantee against faulty workmanship.
- PDC100(S): Suitable for a glass door 8-13mm (5/16 – 1/2 in.) thick, 750-1000mm (29 1⁄2 – 39 3/8 in.) wide and 60-100 kg (132-220 lbs) in weight.
- PDC105(S): Suitable for a glass door 10-15mm (3/8 – 9/16 in.) thick, 750-1250mm (29 1⁄2 – 49 3/16 in.) wide and 80-100 kg (176-220 lbs) in weight.
- Supplied non handed the NHN PDC100 provides optimum efficiency with quick and easy installation.
- Simple final adjustments; 3mm (1/8 in.) backward/ forward, 3mm (1/8 in.) left/right, ± 4° alignment.
- Ambient temperature from -20°C to +50°C (-4°F to +122°F).
- Finishes available as standard are satin and polished stainless steel. (Other finishes are available on request.)
Selection Chart
| Model No. | Function | Applicable Door Width | Applicable Door Weight | Max. Operation Angle |
|---|---|---|---|---|
| PDC100 | Non-hold open | 750 to 1000mm (29-1/2 to to 39-3/8in.) | 60 to 100kg (132 to 220lbs) | 150° (To both sides) |
| PDC100-S | hold open 90° | 750 to 1000mm (29-1/2 to to 39-3/8in.) | 60 to 100kg (132 to 220lbs) | 150° (To both sides) |
| PDC105 | Non-hold open | 1000 to 1250mm (39-3/8 to 49-3/16in.) | 80 to 100kg (176 to 220lbs) | 150° (To both sides) |
| PDC105-S | hold open 90° | 1000 to 1250mm (39-3/8 to 49-3/16in.) | 80 to 100kg (176 to 220lbs) | 150° (To both sides) |
PDC series can only be installed on interior doors, not suitable for exterior doors or doors exposed to strong winds.
Even for PDC”105″ models please note that due to the cam type technology heavy winds might cause opening of the door to a certain angle.
The base plate must be mounted on the hard wood/concrete floor. In case the floor is carpeted, it is recommended to cut off the section of carpet where the base plate will be located.
In case you will mount on the tile floor, follow this instruction.
Finish Option Available
Function & Adjustment
1. Double action
-Non hold open model (PDC100,105): Maximum opening angle 150°
-Hold open model (PDC100-S,105-S): Hold open position angle 90°, maximum opening angle 150°.
2. Two speed adjustment
-Closing speed (150°~ 10°)
-Latching speed (10°~ 0°)
3. Providing over 70% efficiency, the NHN PDC100 combines light opening with smooth closing.
Options
*KPF series glass patches are suitable for a glass door 8-13mm (5/16 – 1/2 in.)
Download
Installation Manual for PDC100-(S)
Installation Manual for PDC105-(S)
Installation Drawing for PDC100-(S)
Installation Drawing for PDC105-(S)
Installation Drawing for TP1
Installation Drawing for TP2
How to rotate pivot spindle
Installation on TILE floor
Looking for Pivot Door Closers for Wooden/Steel Doors?
NHN® 100W Series, Patch Fitting Pivot Door Closers For Wooden, Aluminum and Steel Doors.